Alloy Steel Stud Bolting Materials
The following grades of heat treated alloy steel studs are commonly used for high-pressure or extreme service in diameters of 1/4 inch to 4 inch inclusive. Other grades and other diameters are available on special order.
A heat treated chromium-molybdenum steel widely used for medium high temperature service. (Liquid
quench -50º to 900º F. Air quench -40º to 900º F.)
Similar to B7 studs except that the minimum yield and tensile strength requirements are reduced and the hardness controlled to 235 Brinell maximum. Designed for use in corrosive environments.
(-50º to 900ºF.).
A heat treated chromium-molybdenum-vanadium steel for high pressure, high temperature service.(-50º to 1100ºF)
This grade is intended for low temperature service down to minus 150ºF and has a minimum Charpy impact value of 20 ft. lbs. at this temperature.
(-150º to 1100ºF.)
Similar to L7 studs except that the minimum yield and tensile strength requirements are reduced and the hardness controlled to 235 Brinell maximum. This stud is designed for use in low temperature corrosive environments. (-150º to 1100ºF.)
This grade is intended for low temperature service down to minus 150ºF and has a minimum Charpy impact value of 20 ft. lbs. at this temperature. Available in sizes up to 4 in. (-150º to 1100ºF)
These Chromium-Nickel (AISI 304) austenitic steel studs are used in corrosive environments.
(-325º to 1500ºF.)
These Chromium-Nickel Molybdenum (AISI 316)
austenitic steel studs are used in corrosive environments. (-325º to 1500ºF.)
Suitable for high temperatures and high pressure conditions.
Similar to 2H nuts except this grade is designed for use in corrosive environments.
Previously stamped L7. Heat treated chrome-molybdenum steel nuts suitable for extreme temperature and pressure conditions. Suitable for sub-zero service conditions and have minimum Charpy impact values of ASTM spec. A320. Grade 7 down to minus 150ºF.
Previously stamped L7M. Similar to grade L7 nuts except this grade is designed for use in corrosive environments.
Stainless steel nuts designed for use in corrosive environments.
